Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
obtain thermal conductivity through simulation by varying dimension and doping level in 2D model
Posted Dec 11, 2015, 12:10 a.m. EST Heat Transfer & Phase Change 0 Replies
Please login with a confirmed email address before reporting spam
I am new to COMSOL 4.3a. Currently using 2D model heat transfer of silicon material, hoping to obtain the thermal conductivity as a result from varying the dimension and doping level through simulation.
Heat is supplied from one end, pass through the silicon material and lose at the other end through convection.
But the problem is that the thermal conductivity is already define in the material. And it shows the defined value after every simulation.
Is there any method for me to get the thermal conductivity by simulation using 2D model?
Hello KJ Yong
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.