Rapid Thermal Annealing
Application ID: 504
In the semiconductor industry, rapid thermal annealing (RTA) is a semiconductor process step used for the activation of dopants and the interfacial reaction of metal contacts. In principle, the operation involves rapid heating of a wafer from ambient to approximately 1000–1500 K. As soon as the wafer reaches this temperature, it is held there for a few seconds and then finally quenched.
An indirect iR-lamp is used to heat the wafer. The temperature of the wafer is determined with an indirect sensor, based on the radiation emitted by the wafer.
In this example, the transient heat transfer and radiation of the lamp, wafer and sensor, is modeled by using the Heat Transfer with Surface-to-Surface Radiation interface. The results show the transient temperature distribution and the radiative fluxes. The response of the sensor is determined.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.