Technical Papers and Presentations

Introduction: Design of a thermally driven actuator used in Micro Electro Mechanical Systems (MEMS) with two different metal materials is discussed. To achieve best performance of the thermally driven actuator in this work, it is desired to use a metal material with both high coefficient ... Read More

Incompressible flow field past a circular cylinder within parallel plate channel is very important in industry and science. As well known, beyond the Reynolds number based on the diameter of the cylinder and uniform flow velocity of 40, flow past a circular cylinder cannot hold its two ... Read More

Flow past a circular cylinder arises in many engineering applications, but there is significantly less work studying flow past a cylinder in a confined domain, such as pipe flow or flow in a plane channel. There are many applications where the scaling of a particular problem requires ... Read More

Micro shutter array (MSA) is a programmable optical spatial filtering device fabricated by micro electro-mechanical system (MEMS) technology. It was originally developed for James Webb Space Telescope (JWST) to enable multi-object spectroscopy and operated by a moving magnet. Next ... Read More

Organic Thin Film Transistors are simulated for gas sensing application. The simulation is performed using COMSOL Multiphysics® simulation software's Semiconductor Module. Drift-diffusion (DD) simulation model is used in which the basic equations used are similar to those used for a ... Read More

With the scaling of semiconductor devices into the nanometer regime, short channel effects are an ever-present issue. Among these effects are threshold voltage variation with channel length, reduced output resistance, punch-through and hot-electron degradation. The effect of constant ... Read More

Metallic foams can be plastically deformed to dramatically alter the material’s mass density, microstructure, and bulk mechanical properties. This work investigates the plastic deformation of open-cell aluminum foams numerically, using high fidelity models of metallic foam constructed ... Read More

For many decades Helium-3 (3He) and Argon gas filled detectors have been used for neutron and gamma detection. Detection requires the generation of electrons which can then be measured by electronic means. These electrons are generated either directly through gamma ionization of a gas ... Read More

Waveguides are widely adopted for propagation of high frequency signals. Due to misalignment of waveguide system, bended or twisted waveguide is demanded for connection between waveguides. Compared with straight waveguides, twisted waveguides have a shift of cutoff frequency ... Read More

Determining an optimal port profile for a vented loudspeaker is still an unsolved problem. Studies that measured distortion content suggest a gently flared port is best, while subjective listening tests suggest that more aggressive flare rates are optimal at low to moderate levels, but ... Read More