See How Multiphysics Simulation Is Used in Research and Development
Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.
View the COMSOL Conference 2024 Collection
确保电池模组的温度均匀性是电池热管理系统设计中的重要工作。本文设计了一种具有不同电池分布策略的锂离子圆柱电池模块，以提高其均匀性。建立了3维传热—1维电化学耦合有限元模型，对电池模块的布置进行了分析和优化。基于等差数列和等比数列来排列电池的间隔。发现在电池之间改变间隔的布置是改善电池模组内电芯均匀性的有效方式，尤其是等差数列布置。电池模块的最大温差随着初始间距的增加而减小。电池初始间距达到5.5mm时，电池模块的最大温差可降低13％，最大电压差可降至2.5 mV。具有等差数列布置的电池模块内部的温度和放电的均匀性优于等比数列布置 ... Read More
All-solid-state batteries are among the next generation battery concepts that are currently being envisaged among both the international research community and industrial electronic vehicle producers. In addition to a long lifetime of more than several thousand cycles and intrinsic ... Read More
NMC523电池因为其较高的容量，已经逐渐应用于动力电池行列，但是锂离子电池在使用过程中的不合理容易引发热失控事故。这项模拟工作是来验证探讨NMC523电池针刺热失控中的机理。模拟过程中用到COMSOL化学反应工程模块、全局常微分方程模块。通过模拟，能够看到针刺过程中电池电压变化以及跟随的温度变化。这项模拟工作参考了部分主流杂志的模拟思路，也融合了自己的理解从而进行建模计算。此次模拟能够为电池针刺热失控机理探究提供思路，也能够为正确使用锂离子电池提供建议。 Read More
Modeling the heat generation and the heat transfer of the electrode of lithium-ion battery are introduced. There are several models, such as an homogeneous heating model and a model considering the current and reaction distribution of electrode. Generally, electrodes have large area and ... Read More
引言 采用相变材料的汽车电池热管理技术已经被广泛研究，利用相变材料的相变潜热对电池进行温控，能有效降低电池高倍率工作条件下的电池温升，提高温度均匀性[1,2]。热管作为一种高导热，紧凑型，形式灵活的换热器件，也被用于电池热管理之中[3,4]。本文针对相变材料与热管相结合的换热结构，对该结构的换热特点，以及对影响该结构换热效果的相关参数进行了数值模拟研究。 COMSOL Multiphysics® 的使用 利用 COMSOL Multiphysics 中的电化学模块和传热模块，建立了二维的电池-热管-相变材料“三明治”结构（图1）。电池部分采用了热 ... Read More
Using COMSOL Multiphysics 3.5, a numerical model has been developed to determine the effect of the channel geometry and electrode configuration on cell performance based on polarization curves. The Butler-Volmer equation was implemented to determine the reaction rates at the electrodes. ... Read More
Model calibration and validation were implemented using experimental data from literature. We utilized a microfluidic electrochemical cell that was configured with parallel, rectangular, and multi-layered channels, which is operating in a co-flow mode. CO2 gas stream enters the cathode ... Read More
Recent rapid progress in MEMS with wireless communication system has enabled low power micro sensor network for human body, Body Area Sensor Network (BASN). The information gathering from BASNs will provide a significant opportunities for various medical applications. One of the key ... Read More
A two-dimensional stationary model of a vanadium oxygen fuel cell is developed in COMSOL Multiphysics®. This energy storage device combines a vanadium flow battery anode and an oxygen fuel cell cathode. The oxygen reduction reaction generates additional water, leading to a degradation of ... Read More
This paper presents a design of polymer based micro heater operating in the temperature range of 200- 250°C which could be operated at low voltage (battery operated). The micro heater has been designed and simulated using COMSOL 4.1, FEM simulation tool. Simulation was performed for ... Read More