Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

CMUT Based Free Membrane Intra-Cardiac Volumetric Blood Flow-Meter

P. Priya [1], B. D. Pant [2],
[1] Birla Institute of Technology and Science Pilani, Pilani, Rajasthan, India
[2] CSIR-Central Electronics Engineering Research Institute, Pilani, Rajasthan, India

In this paper, a free membrane is used as a receiver to increase the capacitance and therefore the resolution of the flow meter. For the current application, from the wavelength of sound wave in soft tissue (c= 1540 m/s) the resolution was calculated to be 0.48 mm. This gives the first ... Read More

Extraordinary Optical Transmission in Copper-Based Devices at Terahertz Frequencies

S. Almousa [1], J. A. Deibel [1],
[1] Department of Physics, Wright State University, Dayton, OH, USA

While low frequency light is poorly transmitted through an aperture in a conductive thin film, in the phenomenon known as extraordinary optical transmission (EOT), a narrow band of selected frequencies are transmitted when incident on an array of subwavelength periodic apertures where ... Read More

Drag Fluctuations of a Fully Deployed Flow Actuator Embedded Inside Turbulent Boundary Layer Flow

Dr. A. Elzawawy[1]
[1]Engineering & Technology Department, Vaughn College of Aeronautics & Technology, Flushing, NY, USA

Introduction: In this work, a CFD model of 2D flow around a fully deployed flow actuator was developed using COMSOL Multiphysics® software and the CFD Module. The results of COMSOL modeling is also compared with the experimental data of the same dimensions actuator. The 100mmX2mm ... Read More

COMSOL® Application Builder Lets End-Users Harness the Power of Numerical Modeling and Simulation

J. Speyrer [1], A. Maurer [1], D. Enfrun [1], R. Rozsnyo [2],
[1] Kejako SA, Plan les Ouates, Switzerland
[2] MNCM/HES-SO, Geneva, Switzerland

Kejako is developing a non-invasive solution for demanding presbyopia patients seeking to keep their quality of life through the compensation of visual accommodation decay. The company has already developed the first and proprietary 3D parametric model of the complete eye. The model ... Read More

Simulations of Negative Curvature Hollow-core Fiber

J. Zhang[1], Z. Wang[1], J. Chen[1]
[1]College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha, Hunan, China

COMSOL Multiphysics® software was used to simulate and analyze the transmission attenuation spectra of the negative curvature hollow-core fiber (NCHCF) over the wavelength from 2.7 μm to 4.2 μm. The effect of thickness of capillaries and the effect of the distance between the capillaries ... Read More

Generating Simulated Data for Spot Heating/IR Camera Analysis of Coal Slag Surfaces

M. Silva[1], T. Ring[1]
[1]Department of Chemical Engineering, University of Utah, Salt Lake City, UT, USA

For combustion simulations, the wall temperature and heat transfer is an important piece of information. Coal combustion systems typically have walls that are initially a cast ceramic, but, with time, slag is deposited on the surface and coal and soot are incorporated into the slag. It ... Read More

Using High Pressure Chemical Vapor Deposition to Make Multimaterial Optical Fibers

S. Chaudhuri [1], J. V. Badding [1],
[1] Pennsylvania State University, University Park, PA, USA

Ever since its advent optical fibers have revolutionized the communication technology but apart from communication they are being used in a variety of other areas such as medical technology, sensing, laser sources in the form of fiber lasers, amplifiers, cutting and drilling, defense ... Read More

COMSOL Multiphysics® Software for Simulation of Surface Response to Excitation Method for Manufacturing Process Performance Monitoring

H. Fekrmandi[1], N. Miniello[1], R. Kiflemariam[1], I. Nur Tansel[1]
[1]Mechanical & Materials Engineering Department, Florida International University, Miami, FL, USA

In this study, COMSOL Multiphysics® software was used to simulate the surface response to excitation method (SuRE). An aluminum beam with a piezoelectric element bonded is modeled using the COMSOL Acoustics Module. A frequency domain sweep study was performed to simulate the sweep sign ... Read More

Design and Simulation of a Piezoelectric Actuated Valveless Micropump

J. J. Rojas [1], J. E. Morales [2],
[1] School of Electromechanical Engineering, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica
[2] School of Electronic Engineering, Instituto Tecnológico de Costa Rica, Cartago, Costa Rica

Microfluidics is a multidisciplinary field, basically it designs systems to handle small volumes of fluids. Most applications require a pumping action in order to move the fluid trough the system. For most of them a micro scale active pump is highly desirable. A piezoelectric micropump ... Read More

Simulation of CVD Process in a Reactor

A. Kulkarni [1], F. Mumme [1], V. Frettlöh [1],
[1] Gemeinnützige KIMW Forschungs-GmbH, Lüdenscheid, NRW, Germany

Metal-organic chemical vapour deposition (MOCVD) is a well-known process to produce high quality thin films that can protect, ennoble and functionalize metallic tools. To realize a high performance coating on a complex 3D mold surface, knowledge about the material formation from a ... Read More

First

341–350 of 507

Last