Showing result: 1 - 10 of 48
MEMS
-
Piezo-Acoustic Transducer
People that use piezoelectric transducers are interested in phased-array microphone, ultrasound equipment, ink-jet drop actuators, drug discovery, Sonar transducers, bio-imaging and acousto-bio-theraputics. Basically anyone who is trying to create sound in air or liquids turns to a version of this p...
Read more about this model -
Fluid-Structure Interaction with Two Fluid Phases
The following example demonstrates techniques for modeling a fluid-structure interaction containing two fluid phases in COMSOL Multiphysics. It illustrates how a heavier fluid can induce movement in an obstacle using the arbitrary Lagrangian-Eulerian (ALE) technique along with the Two-Phase Flow, Ph...
Read more about this model -
Droplet Breakup in a T-junction
Emulsions consist of small liquid droplets immersed in an immiscible liquid and widely occur in the production of food, cosmetics, fine chemicals, and pharmaceutical products. The quality of the product is typically dependent on the size of the droplets. Simulating these processes can help in optimi...
Read more about this model -
Filling of a Capillary Channel
This example studies a narrow vertical cylinder placed on top of a reservoir filled with water. Because of wall adhesion and surface tension at the air/water interface, water rises through the channel.
Surface tension and wall adhesive forces are often used to transport fluid through microchannel...
Read more about this model -
Inkjet
This example demonstrates how to model the fluid flow from an inkjet, for instance, within an inkjet printer. An ink droplet is ejected through a nozzle and travels through air until it hits the target.
A conservative level set method is used to track the interface between air and ink. The fluid...
Read more about this model -
Rising Bubble
The level set method is well suited for problems with moving boundaries in which the geometry’s topology changes with time. A bubble of oil that travels up through water and finally merges with oil at the top causes this kind of topology change. For problems where the topology is unchanged as a fu...
Read more about this model -
Composite Piezoelectric Transducer
This example shows how to set up a piezoelectric transducer problem following the work of Y. Kagawa and T. Yamabuchi.
The composite piezoelectric ultrasonic transducer has a cylindrical geometry that consists of a piezoceramic layer, two aluminum layers, and two adhesive layers. The system appli...
Read more about this model -
Magnetic Drug Targeting
Current research on methods to target chemotherapy drugs in the human body includes the investigation of bio compatible magnetic nano-carrier systems, e.g., magnetic liquids such as ferrofluids. This model example investigates an external magnetic field and its interaction with blood flow containing...
Read more about this model -
Cantilever Beam
The elastic cantilever beam is one of the elementary structures used in MEMS designs.
This model shows the bending of a cantilever beam under an applied electrostatic load. This is computed from the electric field that is solved in the deforming geometry/mesh domain using the Arbitrary Lagrangian...
Read more about this model -
Comb Drive
Rectangular comb drives are used in a variety of applications in MEMS systems. This is a model of an electrostatically-actuated comb drive used to open and close a pair of microtweezers.
Because electrostatic forces attract the combs to each other, any geometric change has an impact on the elect...
Read more about this model