Video Gallery
Featured Videos
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 12:00
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Duration: 2:54
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Duration: 4:23
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Duration: 2:06
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Duration: 12:36
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 21:33
Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR
In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...
Duration: 3:28
Performing a Parametric Sweep Study in COMSOL Multiphysics
In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...
Duration: 2:41
Identify Geometric Entities in a Model Using the Selection List
To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how. The Selection List window displays ...
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 12:00
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Duration: 2:54
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Duration: 4:23
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Duration: 2:06
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Duration: 12:36
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 21:33
Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR
In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...
Duration: 3:28
Performing a Parametric Sweep Study in COMSOL Multiphysics
In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...
Duration: 2:41
Identify Geometric Entities in a Model Using the Selection List
To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.
The Selection List window displays ...
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 12:00
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Duration: 2:54
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Duration: 4:23
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Duration: 2:06
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Duration: 12:36
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 21:33
Keynote: Simulating Fluid Flow and Heat Transfer in the HFIR
In this recorded keynote speech from the COMSOL Conference 2014 Boston, James Freels of Oak Ridge National Laboratory chronicles the evolution of engineering tools used over the last 40 years. ...
Duration: 3:28
Performing a Parametric Sweep Study in COMSOL Multiphysics
In product development, it is often necessary to solve several variations of a model to find its design's optimal properties. Instead of manually changing these property values and resolving each ...
Duration: 2:41
Identify Geometric Entities in a Model Using the Selection List
To identify the geometric entities in your model, you can use the Selection List window and display geometry labels. This short tutorial video will show you how.
The Selection List window displays ...