Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to insert a line break in a COMSOL plot tile ?

Posted Dec 9, 2011, 3:20 a.m. EST Results & Visualization Version 4.2a, Version 5.3 3 Replies

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

I have a question,: how to insert a line break in a plot tile in COMSOL v4 ?

there are several html tags accepted (see the help) but I cannot figure out the "line break" and my usual "old fashioned" <cr> or <nl> do not work :)

--
Good luck
Ivar
3 Replies Last Post Jul 17, 2017, 4:25 a.m. EDT
John H.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 9, 2011, 7:46 a.m. EST
If anything, it should be <br> then. Strangely enough, <br> does the trick in axis titles, but not in plot titles. So I guess this means that we cannot insert line breaks in plot titles as of version 4.2a.
If anything, it should be then. Strangely enough, does the trick in axis titles, but not in plot titles. So I guess this means that we cannot insert line breaks in plot titles as of version 4.2a.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 9, 2011, 1:44 p.m. EST
Hello

thanks, I leave it as suggestion then, hopefully <br> will also migrate to the titles in a future version ;)

--
Good luck
Ivar
Hello thanks, I leave it as suggestion then, hopefully will also migrate to the titles in a future version ;) -- Good luck Ivar
GuRu@BFI
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Jul 17, 2017, 4:25 a.m. EDT
I guess, still there is no solution to this issue.
I tried many things:
\unicode{010}
\n
\r
\r\n
Latex syntex etc. no success!

--
kind regards,
Dr.-Ing Yalcin Kaymak
wishing you a fast convergence!
I guess, still there is no solution to this issue. I tried many things: \unicode{010} \n \r \r\n Latex syntex etc. no success! -- kind regards, Dr.-Ing Yalcin Kaymak wishing you a fast convergence!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content