Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Extrude

Posted Aug 28, 2012, 2:31 p.m. EDT Version 4.3 1 Reply

Nelson Amorim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,how can i found the extrude option in Comsol 4.3.

Thanks for attention
1 Reply Last Post Aug 28, 2012, 4:26 p.m. EDT
Art
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 28, 2012, 4:26 p.m. EDT
1. Define geometry as 3D.
2. Right click geometry then click option "work plane."
3. Do the planar geometry which you plane to extrude.
4. Right click geometry again. It will show you options including "extrude."
5. Click extrude. Instruction are pretty simple from here.

--
Arthur Rupel
1. Define geometry as 3D. 2. Right click geometry then click option "work plane." 3. Do the planar geometry which you plane to extrude. 4. Right click geometry again. It will show you options including "extrude." 5. Click extrude. Instruction are pretty simple from here. -- Arthur Rupel

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content