Chemical Blog Posts
![](http://cdn.comsol.com/wordpress/2017/08/graph-showing-the-concentrations-of-pyridine-and-aniline-at-3-minutes-featured.png)
Studying Zone Electrophoresis with COMSOL Multiphysics®
Zone electrophoresis enables scientists to study nucleic acids, biopolymers, and proteins in a wide range of areas. COMSOL Multiphysics® can be used to take a closer look at this process.
![](http://cdn.comsol.com/wordpress/sites/1/2017/07/COMSOL_Blog_ModelImgs_ProteinAbsorption_ThumbnailImg.png)
Introduction to Modeling Surface Reactions in COMSOL Multiphysics®
Bioengineers and electrochemists will appreciate this detailed introduction to modeling surface reactions with the COMSOL® software.
![](http://cdn.comsol.com/wordpress/sites/1/2017/06/COMSOL_Blog_ModelImgs_WoodFrame_ThumbnailImg.png)
How to Model Heat and Moisture Transport in Porous Media with COMSOL®
Modeling the transport of heat and moisture in porous media, like building envelopes and other construction materials, is a simple process with a predefined Heat and Moisture Transport interface.
![](http://cdn.comsol.com/wordpress/sites/1/2017/04/COMSOL_Blog_ModelImgs_VacuumDrying_ThumbnailImg-1.png)
Analyzing Heat and Mass Transfer During Cake Baking with Simulation
As you bake a cake, there are many complex heat and mass transport processes taking place behind the oven door. Take a closer look at the art and science involved in the cake baking process…
![](http://cdn.comsol.com/wordpress/sites/1/2017/03/COMSOL_Blog_ModelImgs_Monopile_ThumbnailImg.png)
Model Electrodes with Nonideal Connectivity in Corrosion Analyses
Learn the appropriate boundary conditions for performing a corrosion analysis in which an electrode is connected to an external short circuit.
![](http://cdn.comsol.com/wordpress/sites/1/2017/03/COMSOL_Blog_ModelImgs_Electrodialysis_ThumbnailImg.png)
Analyzing Reverse Electrodialysis Units with Multiphysics Modeling
Pass the salt…for a clean energy solution. Salinity gradient power relies on osmosis between fresh- and saltwater to generate power, and simulation can help analyze and optimize such systems.
![](http://cdn.comsol.com/wordpress/sites/1/2017/03/COMSOL_Blog_ModelImgs_Boiler_ThumbnailImg.png)
Analyzing Utility Boiler Designs by Simulating Radiative Heat Transfer
To study a utility boiler furnace, you need to account for the effects of radiation, which is difficult to solve for analytically and study experimentally. That’s where simulation comes in.
![](http://cdn.comsol.com/wordpress/2017/02/oscillating-perturbation-in-cell-voltage-and-current-response-featured.png)
Electrochemical Impedance Spectroscopy: Experiment, Model, and App
Experience the phenomenon of electrochemical impedance spectroscopy (EIS) in 3 ways: experiment, model, and simulation application.