Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pipe in the soil

Posted Jan 25, 2016, 5:30 a.m. EST 1 Reply

Farid Behbudov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good day!
I`m making a model of district heating pipe in the soil, to calculate heat losses.
I have done with the modelling with the pipe. However, I don`t know how to surround it with the soil.
Could you be so kind to advice me what to do ?
I will be thankful for any comments.
Thank you.
1 Reply Last Post Jan 25, 2016, 6:01 a.m. EST
Dara Bayat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Jan 25, 2016, 6:01 a.m. EST
Hi

have you already had a look on this model:
www.comsol.com/model/ground-heat-recovery-for-radiant-floor-heating-18529

also you can have a look at this series on Comsol blog:

www.comsol.com/blogs/geothermal-energy-using-earth-heat-cool-buildings/
Hi have you already had a look on this model: http://www.comsol.com/model/ground-heat-recovery-for-radiant-floor-heating-18529 also you can have a look at this series on Comsol blog: http://www.comsol.com/blogs/geothermal-energy-using-earth-heat-cool-buildings/

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content