Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
simulation of a solenoid
Posted Oct 10, 2010, 8:38 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I would like to simulate a solenoid (attached), is composed of a magnetic coil, when turn on causes the displacement of the shaft. Is there a model-like that I could use as an example?
I would like to simulate a solenoid (attached), is composed of a magnetic coil, when turn on causes the displacement of the shaft. Is there a model-like that I could use as an example?
Attachments:
1 Reply Last Post Oct 11, 2010, 7:07 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
try looking at p. 137 in ACDC user guide. (filename acdc_ug.pdf)
You have to specify a current density on the face of the cross section of the coil.
Just draw the coil as a box and specify the current density as plus and minus.
that should do the trick :)
if you are using ver. 3.5 I think there are some examples of how to do coils in the tutorials.
BR
Kim Folmer Andersen
try looking at p. 137 in ACDC user guide. (filename acdc_ug.pdf)
You have to specify a current density on the face of the cross section of the coil.
Just draw the coil as a box and specify the current density as plus and minus.
that should do the trick :)
if you are using ver. 3.5 I think there are some examples of how to do coils in the tutorials.
BR
Kim Folmer Andersen