Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Voltage Induced in a Coil by a Moving Magnet
Posted Feb 2, 2016, 3:21 a.m. EST Low-Frequency Electromagnetics, Mesh Version 4.4 2 Replies
Please login with a confirmed email address before reporting spam
Dear COMSOL Community,
I am currently running a simulation which is almost identical to the tutorial on "Voltage Induced in a Coil by a Moving Magnet (I have attached the file for easy reference).
However, I want the magnet to move at a fixed linear velocity (of 60mm/s) instead of oscillatory as modeled in the tutorial. May I know how I should go about doing this?
Should I continue using Prescribed Mesh Displacement to move the magnet domain, or should I use the Prescribed Mesh Velocity setting instead? I have tried using Prescribed Mesh Velocity settings however I get an error message of "failed to find consistent initial values. last time step is not converged."
Any help is very much appreciated!!!
I am currently running a simulation which is almost identical to the tutorial on "Voltage Induced in a Coil by a Moving Magnet (I have attached the file for easy reference).
However, I want the magnet to move at a fixed linear velocity (of 60mm/s) instead of oscillatory as modeled in the tutorial. May I know how I should go about doing this?
Should I continue using Prescribed Mesh Displacement to move the magnet domain, or should I use the Prescribed Mesh Velocity setting instead? I have tried using Prescribed Mesh Velocity settings however I get an error message of "failed to find consistent initial values. last time step is not converged."
Any help is very much appreciated!!!
Attachments:
2 Replies Last Post Feb 11, 2016, 4:03 a.m. EST