Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moving mesh to couple solid mech and electric currents

Posted Feb 15, 2016, 5:59 p.m. EST 0 Replies

Nagendra Krishna Chaitanya Tummalapalli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello everyone
i was trying to simulate CNT composite for strain sensing application.
I have used solid mechanics module and electric currents module in my simulation.
my main idea is to apply a load and get the stress, strain and corresponding resistance values.
I was assuming that moving mesh could be the best way for this to couple both modukles. Can someone help me in applying the moving mesh module to the model.
else if you feel that there is some best way to couple these both modules, kindly let me know.
I am posting my model below

Thanks
TNK CHAITANYA

Attachments:

0 Replies Last Post Feb 15, 2016, 5:59 p.m. EST
COMSOL Moderator

Hello Nagendra Krishna Chaitanya Tummalapalli

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content