Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Adding an extra dimension to 1-D battery model

Posted Mar 16, 2016, 6:35 p.m. EDT Battery Design Version 5.3 3 Replies

Sara Taslimi Taleghani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I am working on modeling and simulation of Li-ion battery. My model is pseudo-2-dimensional one. So I need an extra dimension to consider diffusion equation in solid phase of porous electrode in radial-direction while other equations are assumed in x-direction. I do not know how to do that. Please help me.
3 Replies Last Post Mar 17, 2016, 5:59 p.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Mar 17, 2016, 8:05 a.m. EDT
Hello Sara,
I am by no means an expert in your field, but it sounds like what you are trying to do is very similar to how this model is implemented: www.comsol.com/model/packed-bed-reactor-238 .
I hope it helps.
Best regards,
Jeff
Hello Sara, I am by no means an expert in your field, but it sounds like what you are trying to do is very similar to how this model is implemented: http://www.comsol.com/model/packed-bed-reactor-238 . I hope it helps. Best regards, Jeff
Sara Taslimi Taleghani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Mar 17, 2016, 4:07 p.m. EDT
Hi Jeff,
Thanks for your response. Is it possible for you to introduce me an expert in battery part of COMSOL?I do not know how to contact them.
Best regards,
Sara
Hi Jeff, Thanks for your response. Is it possible for you to introduce me an expert in battery part of COMSOL?I do not know how to contact them. Best regards, Sara
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Mar 17, 2016, 5:59 p.m. EDT
You can contact COMSOL's Tech Support team via the web portal www.comsol.com/support or by email at support@comsol.com . Your question will be assigned to the first available expert in the topic area of your question.
Best regards,
Jeff
You can contact COMSOL's Tech Support team via the web portal www.comsol.com/support or by email at support@comsol.com . Your question will be assigned to the first available expert in the topic area of your question. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content