Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Introducing conditions at an arbitrary time-step

Posted Apr 14, 2016, 2:36 a.m. EDT Studies & Solvers Version 5.0, Version 5.1, Version 5.2 0 Replies

William Lawrie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I am currently simulating charge transport in a PIN diode, but am facing some difficulty. I want to create a version of my system in its steady-state behaviour while under bias first, then introduce a charge plume under these conductions and observe the resulting current at the electrodes of my device.
At this stage, I am only able to introduce the plume at the initialization of the device, which is definitely not in steady state.

Thanks for your help!
0 Replies Last Post Apr 14, 2016, 2:36 a.m. EDT
COMSOL Moderator

Hello William Lawrie

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content