Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
HyperElastic material does not follow Prescribed Displacement BC
Posted Apr 28, 2016, 6:38 a.m. EDT Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
I am modeling a Lip Seal and I wanted to compare the Dispalcement Field when using a Linear Elastic material or when setting a HyperElastic one. The model is 2D axysimmetric (see picture attached).
Since the seal is confined in a defined space, I am using the Prescribed Displacement BC to account for the shaft and the seal housing . Two Prescribed Displacement BCs on Z (top and bottom) and two Prescibed Displacement BCs on R (left and rigt).
Funnily when I use a Linear Elastic material, the Prescribed Displacement BC is perfectly followed (snap on the left side). However, when I switch it to HyperElastic (snap on the right side) the Prescribed Displacement are not really accounted.
Any idea? I am finding asolution for the HyperElastic way too early? I was checking the Relaxation and Solver parameters but I did not manage to get any improvement...
Thanks in advance,
Attachments:
Hello Francesc-Xavier Borras
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.