Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to project "arrow surface" in a "cut plane" in Comsol

Posted Jun 10, 2016, 2:04 a.m. EDT 1 Reply

Amin Hassanzadeh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

I did simulation of flow in a 3D geometry in COMSOL and I generated a cut plane somewhere in the geometry where I want to see the velocity vectors in that plane. In order to do that, first I used "Arrow surface" and made the velocity vectors. However, I need to have the component of the velocity vectors which is on the surface of my plane. Do you have any idea how to do that?

Thanks!
1 Reply Last Post Jan 23, 2017, 4:54 p.m. EST
COMSOL Moderator

Hello Amin Hassanzadeh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Lane Owsley
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Jan 23, 2017, 4:54 p.m. EST
You could subtract off the projection onto the normal.
You could subtract off the projection onto the normal.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content