Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Is it okay to do PML simulation of off-centered anchor?

Posted Aug 8, 2016, 10:49 p.m. EDT MEMS & Nanotechnology, Acoustics & Vibrations, MEMS & Piezoelectric Devices, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 5.1 0 Replies

Hoon Jeong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm doing PML simulation for anchor loss.

My device has two anchors at the end of long rectangular resonator.

I've put whole device on the substrate, so the anchors are equally
off center of the cylindrical/spherical substrate.

Is it okay to do this?

the radius of the substrate is almost equal to the distance between two anchors.

0 Replies Last Post Aug 8, 2016, 10:49 p.m. EDT
COMSOL Moderator

Hello Hoon Jeong

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content