Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Splitting geometry surfaces

Posted Dec 28, 2010, 5:49 p.m. EST MEMS & Nanotechnology, Interfacing, MEMS & Piezoelectric Devices, Geometry Version 4.1 1 Reply

aiyoung
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I've made a MEMS device in Pro/e and am using the LIVELINK for Pro/e module to use the pro/e geometry in COMSOL.

The issue i'm having is that i need to split my top surface into two parts so that i can apply a voltage and ground BC to the model.

I was wondering if anyone has experiance in splitting surfaces in Pro/e, or any ideas that i could try in COMSOL.

Thanks!
1 Reply Last Post Mar 14, 2011, 9:21 a.m. EDT
COMSOL Moderator

Hello aiyoung

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Akmal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 14, 2011, 9:21 a.m. EDT
Hi,

i don't realy sure whether you already solve the problem or not.

In comsol you can make cutting face on a workplan. and after you finalize the geometry, the parts or surface should be splited.

i hope it helps.



Hi, i don't realy sure whether you already solve the problem or not. In comsol you can make cutting face on a workplan. and after you finalize the geometry, the parts or surface should be splited. i hope it helps.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content