Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Designing a triangular Bowtie Antenna

Posted Sep 26, 2016, 11:36 a.m. EDT 1 Reply

Carina Brieskorn
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,
I am new to Comsol Multiphysics, so I hope you can help me.
I want to simulate the S11-Parameter and the radiation pattern of a triangular Bowtie Antenna. Can anyone tell me how to design the differential feeding for the antenna? Between the two halfes of the Antenna there is a 2 mm gap. The antenna is made of copper and is placed on a substrate made of FR-4.

Thanks.
1 Reply Last Post Sep 29, 2016, 12:44 p.m. EDT
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Sep 29, 2016, 12:44 p.m. EDT
Consider defining a lumped port between the two driven edges of the antenna.

DW Greve
Consider defining a lumped port between the two driven edges of the antenna. DW Greve

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content