Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Micromirrro model

Posted Oct 19, 2009, 4:21 p.m. EDT 4 Replies

Mohammad Kamal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
Can anyone please help to model a electrostation parallel plate micromirror. (like this one www.comsol.com/papers/5007/ ).

How to apply voltage between electrods?
Thanks

Kamal
4 Replies Last Post Aug 21, 2011, 4:07 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Oct 19, 2009, 4:46 p.m. EDT
Hi

I would start by studying the MEMS module "Comb Drive" examples, see the memsmodlib.pdf documentation (or try your luck on the web wth google)

Ivar
Hi I would start by studying the MEMS module "Comb Drive" examples, see the memsmodlib.pdf documentation (or try your luck on the web wth google) Ivar
Mohammad Kamal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Oct 19, 2009, 5:14 p.m. EDT
Hi Ivar
Thanks
I did that.
But how I can apply voltage mirror (ground electrode) and 2 bottom electrode to see the rotation.


Thanks again

Hi Ivar Thanks I did that. But how I can apply voltage mirror (ground electrode) and 2 bottom electrode to see the rotation. Thanks again
Pisut Rps
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 23, 2011, 4:02 a.m. EDT
Hi Mohammad,
I am researching in micromirror, I would like to applied voltage to electrode. Could you share your method?
Hi Mohammad, I am researching in micromirror, I would like to applied voltage to electrode. Could you share your method?
saba saba
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 21, 2011, 4:07 a.m. EDT
hi everybody
i want to simulate a micromirror too but in the first step i must get boundery condition for mirror surface i select gold as material of my mirror but i dont know how can select my boundery and optic source?if anybody know my problem please help me.
hi everybody i want to simulate a micromirror too but in the first step i must get boundery condition for mirror surface i select gold as material of my mirror but i dont know how can select my boundery and optic source?if anybody know my problem please help me.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content