Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
failed to find consistent initial values in transient CFD
Posted Jan 10, 2011, 2:51 p.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD), Studies & Solvers Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
I am doing a transient CFD calculation with time varying boundary condition. The inlet boundary is a pressure jumps from zero to 10^5 Pa. I created a unit step function step 1 in global definitions. and the boundary condition for the inlet is set as follows:
Pressure, no viscous stress
Pressure: P_o scale 10^5*step(t[1/s]).
The mesh is square mapped mesh.
So I have the right unit setup. But I get the error failed to find consistent initial values. How should I eliminate the things not right in this model
Pressure, no viscous stress
Pressure: P_o scale 10^5*step(t[1/s]).
The mesh is square mapped mesh.
So I have the right unit setup. But I get the error failed to find consistent initial values. How should I eliminate the things not right in this model
Attachments:
1 Reply Last Post Jan 11, 2011, 9:47 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I think it is the mesh problem for boundary condition