Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Defining contact pairs for acoustic-structural interaction problems
Posted Oct 26, 2016, 2:40 a.m. EDT Acoustics & Vibrations, Structural Mechanics Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
I am attempting to simulate a transmission loss problem using acoustic-structural interaction. I am facing issues with applying contact pairs. These are the contacts that I wish to define:
a) Contact between structural surfaces are "glued" firmly together.
b) Contact between structural surfaces and fluid medium is basically for acoustic-structural interaction.
Read through COMSOL acoustic manual but not much is mentioned. Hope someone can provide some guidelines to get started. Thank you.
Attached is a schematic of the problem.
Attachments:
Hello Linus
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.