Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Cross polarization calculation
Posted Dec 18, 2016, 11:47 p.m. EST Version 5.2a 1 Reply
Please login with a confirmed email address before reporting spam
Recently I try to dig into optical chirality, and I simulate a planar array of meta split ring resonator . I intend to pass a normally incident wave along z direction, with linear polarization Eix in x direction. I want to see if the transmitted light has the electric field in the y direction (Ety), and calculate the cross polarization transmission Txy=Ety/Eix.
Can someone give hint how to do that? I used period port and calculateed the difraction order. The high order modes show in-plane and out-of-plane components, but the fundamental modes at port 1 and port 2 show only one , they donot show two modes in-plane and out of-plane. What I would like to get is the S21=Ety/Eix.
Can someone give hint how to do that? I used period port and calculateed the difraction order. The high order modes show in-plane and out-of-plane components, but the fundamental modes at port 1 and port 2 show only one , they donot show two modes in-plane and out of-plane. What I would like to get is the S21=Ety/Eix.
1 Reply Last Post Dec 21, 2016, 3:03 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello,
did you use Mode Analysis module to calculate modes?
It's better to attach your model to find out the problem.
did you use Mode Analysis module to calculate modes?
It's better to attach your model to find out the problem.