Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
model on comsol4.1
Posted Jan 27, 2011, 1:25 a.m. EST MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
generally after designing a model in a comsol 4.1 we have to apply some conditions on to boundries of the model .
let us consider a simple microresistor beam, in this case when the model is designed we have to select some boundries or object to apply potential or temp or .....to do fillet..
but it is difficult to choose the boundries from the model since it is not display on to the model
and everytime we hve search for a boundary in the model or we hve to add all boundaries then we hve to delete whichever we dont want but it not the correct way to do it
is there is any alternative method to to select the boundries.
Hello Vikram Kumar Singh
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.