Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Laminar flow and turbulent flow

Please login with a confirmed email address before reporting spam

Sir ,

Please send me some documents relating modeling of laminar and the turbulent flows for the given set of equations

2 Replies Last Post Feb 3, 2011, 12:40 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 3, 2011, 5:58 a.m. EST
Hi

I do not really have anything more than the COMSOL doc, Wiki (lots of data there, rather few errors) and particularly my books, see also the book references of the main Comsol site

--
Good luck
Ivar
Hi I do not really have anything more than the COMSOL doc, Wiki (lots of data there, rather few errors) and particularly my books, see also the book references of the main Comsol site -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 3, 2011, 12:40 p.m. EST
Sir,

I am attaching the IEEE paper where u can see some se of equations under lamina and turbulent flows...
How to built a model using these equations in comsol4.0a


yours faithfully
kartikeya
Sir, I am attaching the IEEE paper where u can see some se of equations under lamina and turbulent flows... How to built a model using these equations in comsol4.0a yours faithfully kartikeya

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.