Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electrolyte impedance at micro level
Posted Apr 17, 2017, 5:56 a.m. EDT Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
i am working on two electrode potential and electrolyte in between.
the main domain is Electric current and then frequency domain.
electrolytes=water or PbS (Phosphorus buffer saline) the problem is when i change the electrolyte either water or PbS the electric potential distribution remain same.
but it should be different because the conductivity and relative permittivity of both are different and potential drop and current through both should be different.
but here i got same result for both. can any one of you please guide me where i am wrong.
P.S. Got trouble in attaching file of comsol as well as image file: file extension error.
Hello Muhammad Awais Aslam
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.