Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

joule heating

Posted Feb 21, 2011, 1:37 a.m. EST Version 3.5a, Version 4.1 1 Reply

Cindy Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm trying to change between COMSOL 3.5 and 4.1. In COMSOL 3.5 there used to be a module on "Electro-Thermal Interaction" with Joule Heating. What in COMSOL 4.1 can I use? I've tried Heat Transfer-->Joule Heating, but it doesn't provide me with the same results.

Also in COMSOL 3.5, there was this build-in variable Q_dc. Is that still in COMSOL 4.1?
1 Reply Last Post Feb 21, 2011, 3:19 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 21, 2011, 3:19 a.m. EST
Hi

in V4 turn on the equations in the preferences and look at the new lowest level sub-nodes. There you find the list of new variables, new names, commented

--
Good luck
Ivar
Hi in V4 turn on the equations in the preferences and look at the new lowest level sub-nodes. There you find the list of new variables, new names, commented -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content