Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Question about plotting.

Posted Feb 21, 2011, 6:56 a.m. EST MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Geometry, Structural Mechanics Version 4.1 1 Reply

Byeong Gyun Oh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, all
I'm using V4.1

I plotted principal stress surface/volume.


How can I extract stress values from the principal stress surface / volume?
Also, where can I confirm the dimension of extracted values?

1 Reply Last Post Feb 21, 2011, 5:13 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 21, 2011, 5:13 p.m. EST
Hi

in V4 I use the "Tables" filled in by Derived Values operations to quickly extract data files/tables and neted tables.

You can then copy&paste or export them to excel or other tools

--
Good luck
Ivar
Hi in V4 I use the "Tables" filled in by Derived Values operations to quickly extract data files/tables and neted tables. You can then copy&paste or export them to excel or other tools -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content