Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Opticaly modulated laser - Tissue interaction

Posted Mar 1, 2011, 3:54 p.m. EST RF & Microwave Engineering, Wave Optics, Bioengineering, Modeling Tools & Definitions, Parameters, Variables, & Functions 3 Replies

Ebraheem Sultan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there ..
I am trying to investigate the frequency modulated laser effect on tissue. I am modulating the laser from 0 -1GHz. and trying to see the insertion and phase loss with certain seperation of laser to photodiode? can this be done in comsol? So i have a laser with certain wavelength that is frequency modulated and a photodiode, both been apart with certain dictance and the media is a human tissue. looking for how much modulated photons i am going to receive and whats their phase information. !!!!

Ebrahim
3 Replies Last Post Mar 2, 2011, 2:24 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 1, 2011, 4:08 p.m. EST
Hi

A challenging model you need there !

I would rather ask myself what is giving amplitude and phase shift of the laser beam on its way trough your tissue ?

If you can express this with a PDE + material data properties with their wavelength and illuminted power relation, then I believe you should be able to feed that into COMSOL.

But if not, then I do not believe COMSOL can give you new inputs, as its basically "only" a powerful numerical solver of PDEs and ODEs so you need to express the physical phenomena first.

--
Good luck
Ivar
Hi A challenging model you need there ! I would rather ask myself what is giving amplitude and phase shift of the laser beam on its way trough your tissue ? If you can express this with a PDE + material data properties with their wavelength and illuminted power relation, then I believe you should be able to feed that into COMSOL. But if not, then I do not believe COMSOL can give you new inputs, as its basically "only" a powerful numerical solver of PDEs and ODEs so you need to express the physical phenomena first. -- Good luck Ivar
Ebraheem Sultan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 1, 2011, 5:00 p.m. EST
Hi Ivar
Yes i can module the diffusion equation (boltzman Transport) through PDE using helmholtz equation, but i am not sure how to set the input as a laser beam of modulated photons? and then read the s-parameter in both phase and magnitude?

How far can you help in this?

Thanks
Ebrahim

Hi Ivar Yes i can module the diffusion equation (boltzman Transport) through PDE using helmholtz equation, but i am not sure how to set the input as a laser beam of modulated photons? and then read the s-parameter in both phase and magnitude? How far can you help in this? Thanks Ebrahim
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 2, 2011, 2:24 a.m. EST
Hi

unfortunately no, it's too extensive, I have a full time job using COMSOL and my presence here is only on private time, so I restrict myself to short question/answers. Furthermore I have dropped 3.5 now, too much work to use both systems, and 4.1 is very good, and far easier/quicker to use.

It's a nice project though

--
Good luck
Ivar
Hi unfortunately no, it's too extensive, I have a full time job using COMSOL and my presence here is only on private time, so I restrict myself to short question/answers. Furthermore I have dropped 3.5 now, too much work to use both systems, and 4.1 is very good, and far easier/quicker to use. It's a nice project though -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content