Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Solid Mechanics & Moving Mesh

Posted Jul 20, 2017, 4:49 p.m. EDT Low-Frequency Electromagnetics, Mesh Version 5.0 0 Replies

Chefu Su
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

I am simulating a Ni nano-wire in a magnetic fields, no current interface (mfnc) to investigate how this Ni wire will be aligned by a strong magnetic strength. I also added the solid mechanics interface plus moving mesh interface in this simulation. The motion of this Ni wire is moved by applying the Maxwell Stress Tensor from the mfnc interface to the boundary load of solid mechanics interface. Thus, I am wondering how I can explain why this two interfaces (solid mechanics & moving mesh) has to be coupled for the motion of Ni wire. Or there is another way to apply the force to the moving mesh directly without using the solid mechanics interface.

Thanks,
0 Replies Last Post Jul 20, 2017, 4:49 p.m. EDT
COMSOL Moderator

Hello Chefu Su

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content