Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Geometry and domain conditions change during parametric sweep

Please login with a confirmed email address before reporting spam

I have a high voltage terminal domain and I'm trying to perform a parametric sweep for its positional parameters to calculate the electric field distribution on my insulator model. I've defined parameters and everything, I can successfully perform a parametric sweep but the results are very different from expected because the terminal domain resets itself to 0 voltage, its material changes from aluminium to air during the sweep and everything gets screwed up. What could be causing this?


1 Reply Last Post Dec 27, 2017, 9:11 p.m. EST

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Dec 27, 2017, 9:11 p.m. EST
Updated: 7 years ago Dec 27, 2017, 9:11 p.m. EST

For some reason adding a unit expression to the parametric sweep menu ruins it although everything is in cm in my model. I removed the unit expression and it works now. It's probably a bug with 5.3.

For some reason adding a unit expression to the parametric sweep menu ruins it although everything is in cm in my model. I removed the unit expression and it works now. It's probably a bug with 5.3.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.