Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How can i embed a 2D object into 3D

Posted Mar 31, 2011, 9:44 a.m. EDT Low-Frequency Electromagnetics, Geometry Version 4.0a 1 Reply

Linda Boatemaa
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have a cylindrical block and wanrt to insert a flat contact on top.

so i created the flat contact in workplanes, but i cant find the way to embed it into the 3D feature.

Any help.

Regards-LINDA!
1 Reply Last Post Apr 2, 2011, 1:58 p.m. EDT
Mohamed Youssef
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 2, 2011, 1:58 p.m. EDT
you should do all your work in 3D if you are going to make a 3D geomtery. but you want to make 2D in your 3D work plane. then you extrude with zero distance your 2D geometry.

Thanks
Mohamed Youssef
you should do all your work in 3D if you are going to make a 3D geomtery. but you want to make 2D in your 3D work plane. then you extrude with zero distance your 2D geometry. Thanks Mohamed Youssef

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content