Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

problem with conservative form of two phase flow phase field

Posted Mar 4, 2018, 6:16 a.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics Version 5.3a 0 Replies

Farhad Aalizadeh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every body, I'm simulating droplet formation in COMSOL 5.3a using two phase flow,phase field. when i use non-conservative form the droplets form and move in the microchannel, but when i switch to conservative form, it give the illogical results, some droplets form befor the T-junction!!! is there anyone who could help me? regards, Farhad

Attachments:

0 Replies Last Post Mar 4, 2018, 6:16 a.m. EST
COMSOL Moderator

Hello Farhad Aalizadeh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content