Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Permanent Magnet - AC/DC Module
Posted Mar 8, 2018, 11:28 p.m. EST Low-Frequency Electromagnetics Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hello, I am quite new to COMSOL, and I've been wanting to create a semicone geometry, with a cylindrical magnet at the bottom surronded by an Air domain, so I can see the magnetic flux density on the iron semicone. I've seen the permanent magnet tutorial available here in the COMSOL website, and it seems the problem arises on the creation of the geometry. On the tutorial the geometry was imported therefore I had no issue. So how was the horse-shoe shaped geometry created?? Was it by composing? Unifying?
I ask this because the magnetic flux density that I see does not behave like it should, and the problem is on the geometry!
I appreciate any help that will be given
Please login with a confirmed email address before reporting spam
Hello Lucca.
Lots of tutorials have step-by-step instructions on how to create different types of geometries. For your problem, I suggest these:
https://www.comsol.com/model/baffled-membrane-9771
https://www.comsol.com/model/sun-s-radiation-effect-on-two-coolers-placed-under-a-parasol-12825
Follow the PDF instructions on how to create the geometry to learn how to use the geometry creating tools.