Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Creating my own geometry and analyzing it via Ray Optics

Posted Mar 14, 2018, 3:35 p.m. EDT Electromagnetics, Ray Optics, Wave Optics Version 5.3a 1 Reply

Kerem Ünlü
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have my own solar dish receiver geometry in my mind and I could draw it via a cad software(I follow the no ads rule:) and I need to create simulations by using Ray Optics module. The things I am interested is for example the situation of reflected beams. Could you please explain me what should I do step by step then this post could guide other people who are working in optics area?

P.S: If someones uses solar dish receiver designer, I can also accept the suggestions for it.

Cheers, Kerem

1 Reply Last Post Mar 16, 2018, 6:35 a.m. EDT
Yassir Alamri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Mar 16, 2018, 6:35 a.m. EDT

Dear Kerem

The below link will help you

https://www.comsol.com/model/solar-dish-receiver-19227

Regards

Dear Kerem The below link will help you https://www.comsol.com/model/solar-dish-receiver-19227 Regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content