Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Interaction between matlab and comsol

Posted Nov 18, 2009, 10:03 a.m. EST 1 Reply

Sébastien RANCOURT-GRENIER
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I m building a segregated program that use RF and structural module

Is it possible the modify the result given by the RF module (Group1) in matlab before it is used by the structural module (group2) and how it can be done
1 Reply Last Post Nov 18, 2009, 5:09 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 18, 2009, 5:09 p.m. EST
Hi

from my undestanding, this can only be done if you are controlling COMSOL fully from Matlab, then everything is possible (the old FEMLAB way of doing things).

I would start to read the mlinterface.pdf document, start with some of the simpler cases

Good luck
Ivar
Hi from my undestanding, this can only be done if you are controlling COMSOL fully from Matlab, then everything is possible (the old FEMLAB way of doing things). I would start to read the mlinterface.pdf document, start with some of the simpler cases Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content