Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Three phas in 2D

Posted May 5, 2011, 5:35 p.m. EDT Version 4.1 0 Replies

Mansur Ermila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to model three phase fluid in 2D model. The first phase is a heavey fluid used to displace another fluid (lighter one), there is some spots in the pipe where the lighter fluid gelled. I want to consider gelled fluid as a third phase, can I model that in 2D?

Any kind of help is highly appreciated.
0 Replies Last Post May 5, 2011, 5:35 p.m. EDT
COMSOL Moderator

Hello Mansur Ermila

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content