Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfert and depth of the fusion zone.

Posted May 19, 2011, 2:48 a.m. EDT Version 4.0, Version 4.0a, Version 4.1, Version 4.2 0 Replies

Karim Bentayaa
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello,

I have to modeling a laser heating problem on a thin metal plate. And whant to know how could I do to plot a 1D graph witch represent the depth of fusion zone (isotherm) depending on arc length, so an f(arc length x)= arc length y function. Is it possible?
Thank you, best regard.
0 Replies Last Post May 19, 2011, 2:48 a.m. EDT
COMSOL Moderator

Hello Karim Bentayaa

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content