Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Adaptive Mesh
Posted May 23, 2011, 1:30 p.m. EDT Low-Frequency Electromagnetics, Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.1 2 Replies
Please login with a confirmed email address before reporting spam
I have the problem which involves shape deformation using Level-set method in fluid flow module, Is it possible to re-mesh the problem after some time step ( when the sharp edge creates in the problem)?
Is it anything like adaptive mesh possible in comsol V.4 ?
If i want to use the finer mesh from beginning, it is so much time and memory consuming, so I want to use finer mesh when the sharp edges will be created in my problem after some specific time?
Best
Please login with a confirmed email address before reporting spam
Adaptive meshing for transient simulations is available starting at version 4.2.
Please login with a confirmed email address before reporting spam