Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to plot a variable depending on both position and time in 3D surface
Posted May 30, 2011, 11:00 a.m. EDT Results & Visualization Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
I have a 2D model. some variables are both depending on time and x-position. I want to do a surface plot for these variables and I could do it in 3.5. but can I use COMSOL 4.1 to do this?
Thanks very much
Thanks very much
1 Reply Last Post May 31, 2011, 1:17 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the Results node is indeed different from 3.5. But it's "just" a new way and I find now, easier and more powerful to use. Check the doc again and do some of the examples.
A plot is normally done for (x,y,z) as a surface plot on a 3D Plot node, or for (x,y) a surface plot on a 2D Plot node. The time is defined ont he main plot node
--
Good luck
Ivar
the Results node is indeed different from 3.5. But it's "just" a new way and I find now, easier and more powerful to use. Check the doc again and do some of the examples.
A plot is normally done for (x,y,z) as a surface plot on a 3D Plot node, or for (x,y) a surface plot on a 2D Plot node. The time is defined ont he main plot node
--
Good luck
Ivar