Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Events interface - steps taken by solver

Posted Jul 24, 2018, 11:04 a.m. EDT Electromagnetic Heating, Studies & Solvers Version 4.3b 0 Replies

Nichal Gentilal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I successfully implemented this example: https://br.comsol.com/blogs/implementing-a-thermostat-with-the-events-interface/ However, for my purposes, I just want that the HeaterState verify my condition if the time is an integer. I tried to do this in the time-dependent solver -> time stepping and I selected "steps taken by solver" as "strict" and changed the initial and maximum step to "1s". However, the solver keeps changing HeaterState at non-integer times. Can someone help me?

Thanks!

0 Replies Last Post Jul 24, 2018, 11:04 a.m. EDT
COMSOL Moderator

Hello Nichal Gentilal

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content