Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Model a box filled with different medium

Posted Jul 29, 2018, 3:24 a.m. EDT Electromagnetics, Low-Frequency Electromagnetics Version 4.3b 1 Reply

Nikhil Valsan Kulangareth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I need to model four box(cubes) stacked together each of the boxes have medium of different conductivity. How can I do this? Thanks in advance.

1 Reply Last Post Jul 29, 2018, 11:08 a.m. EDT
Nichal Gentilal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Jul 29, 2018, 11:08 a.m. EDT

Hi Nikhil,

Create four differences boxes (one at a time) specifying their coordinates, you will then have 4 domains. In materials you can then assigne different materials to each box.

Hope this helps, Nichal

Hi Nikhil, Create four differences boxes (one at a time) specifying their coordinates, you will then have 4 domains. In materials you can then assigne different materials to each box. Hope this helps, Nichal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content