Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
PDE in comsol 4.0a
Posted Jul 20, 2011, 9:58 a.m. EDT Materials, Results & Visualization, Studies & Solvers Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
as per given info:
four differential eqn :
1). one non linear (pde)
CmVt=(r/2p)Vxx+gNa*m^3*h(VNa-V)+gKn^4(Vk-V)+gL(VL-V)
Please separate the above into conservative flux, source term, damping or mass coefficient, mass coefficient
2).3 linear (ode)
dw/dt=Aw(1-w)-Bw
Aw and Bw are variables.
where w is m,n,h
in which part should i declare these ode's
please check dat the procedures which i hav followed is correct or not.
3) In V 3.5a we hav UMFPACK (direct solver but i could'nt locate it in v 4.0a
Attachments:
Hello Richa Kumari
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Can you please let me know how can I introduce my own PDEs in COMSOL 4.0?
In addition, how can I see the equations being used for any model in COMSOL 4.0?
Many thanks in advance.