Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Regarding microwave heating

Posted Nov 22, 2018, 3:00 p.m. EST RF & Microwave Engineering, Heat Transfer Version 4.2a 1 Reply

Yaswanth Maddali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

The following error keeps coming when I try to simulate microwave heating of metals. can anyone tell me where I'm going wrong? I'm a beginner.

https://drive.google.com/open?id=0B9zNCIGeNgTtcWxfb2UwT3BTd2FiTUg2cFZOalhrc3BXMERr

1 Reply Last Post Dec 4, 2018, 5:31 p.m. EST
Sohan Birla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Dec 4, 2018, 5:31 p.m. EST

Check yours input boudary whether is is well defined. Make sure you have approairate material proeprties assigned. Lastly check meshing and first let software auotmaterically set size based on MW frequency. Check the box allowing losses to take into accoutn for meshing.

Check yours input boudary whether is is well defined. Make sure you have approairate material proeprties assigned. Lastly check meshing and first let software auotmaterically set size based on MW frequency. Check the box allowing losses to take into accoutn for meshing.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content