Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Droplet breakup

Posted Aug 7, 2011, 6:01 a.m. EDT Version 3.5a 1 Reply

Dip Prakash Samajdar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Sir,
Can the Droplet Breakup model also be simulated in 2D ? I have tried to do it but the result is not satisfactory and there is no formation of such droplets.What changes in the settings and meshes (as compared to the 3D model) should be done to yield perfect results.
1 Reply Last Post Oct 7, 2011, 6:55 p.m. EDT
COMSOL Moderator

Hello Dip Prakash Samajdar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

RONG XU
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 7, 2011, 6:55 p.m. EDT
I have the same problem
I have the same problem

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content