Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time Harmonic Analysis of a membrane coupled to Pressure Acoustics
Posted Dec 14, 2009, 8:34 a.m. EST 0 Replies
Please login with a confirmed email address before reporting spam
I am fairly new to COMSOL and I am trying to obtain the frequency response analysis of a clamped membrane which is loaded by the water medium. I am stuck at some points, I am searching an answer for the following question:
I am using an axisymmetric model. First, I started with "Axial Symmetry, Stress-Strain" mode and found the eigenfrequencies. Then I used prestress (first static and then freq. response analysis) and I saw that frequency shifts as expected.
Next I coupled the acceleration to the "Pressure Acoustics" mode and the genereted pressure to the "Axial Symmetry, Stress-Strain" mode. However, after a frequency response analysis the membrane shape becomes very peculiar and the results are not correct. Can somebody help me to come through thsi problem please.
Hello Ahmet Yildirim
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.