Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Distributed Initial Stress as function of dimension.
Posted Feb 27, 2019, 10:02 a.m. EST Structural & Acoustics, General, Parameters, Variables, & Functions Version 5.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi, I am new in Comsol. - I would like to know how to create distribute Initial Stress as function of dimension (like length and width). for example [(length +width)*Initial Stress] at any given length and width - Alternatively, if I have coordinates of Initial Stress Locations with different values, how to use that in the calculation. (x, y, Initial stress) => (0,0, 10Mpa) ; (1,1,20); (2,1, 15) so on.
This will be used for very simple bar/rectangular cross section profile.
Looking forward to hear from you, thanks!
With best regards, Mosharraf Hossain
Hello Mohammad Hossain
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
salam alikom sir Mosharrof i need you help. i show your models in your count of youtube https://www.youtube.com/watch?v=SLDm7Sz-Z08 I am very interested in your model Re=200 it is possible please can you send me your model best regards