Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to add geometry between studies in Comsol Multiphysics?
Posted Mar 19, 2019, 12:23 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
Hi Is it possible to add geometry between the studies and use the result of a previous study to solve the next one? I am going to simulate this situation (simple heat transfer in solids 2D): 1. One block of steel cooling from 1000 K by natural convection for 1000 s from the top surface (the other three sides are isolated). 2. After this time, another block of steel is placed on its top, and they cool for another 1000 s together from the top surface of the top block (so the heat flux BC is transferred from the top of the lower block to the top surface of the top block). I really appreciate if you guys do the simulation and send me the file, or at least guide me here please.
Hello Will Tran
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.